low noise oscillator series lno 10 00 b 2 ocso @ 1 g hz lno 10 00 b2 C revision c C april 2016 1 / 4 www.rakon.com r a k o n r e s e r v e s t h e r i g h t t o m o d i f y h e r e i n s p e c i f i c a t i o n s a n d i n f o r m a t i o n w h e n n e c e s s a r y t o p r o v i d e o p t i m u m p e r f o r m a n c e a n d c o s t specific request can be addressed to rakon info@rakon.fr product description lno 10 00 b2 is a low noise and low power ocvcso (oven controlled, voltage controlled, saw oscillator) at 1g h z. it is designed for lab environment (test equipment, shelter, ground based military equipment, etc.). the 1ghz signal is generated from a 5 00mhz fundamental frequency multiplied by 2. lno 10 00 b2 is available in a 47.5 x 59.5 x 1 2.7 mm (typical values , excluding connectors ) machined low profile package, including connectors and mounting p ads. features ? excellent phase noise performance (typical value s ) : o - 135 dbc/hz @ 1 khz offset o - 159 dbc/hz @ 10 khz offset o - 172 dbc/ hz noise floor ? broadband jitter < 5 fs (offs et frequencies from 10 khz to 4 0 mhz) applications ? instrumentation (test equipment, simulator) ? ground based military equipment a s per mil - prf - 28800f , class 3 ? clock for h igh speed adc typical phase noise
low noise oscillator series lno 10 00 b 2 ocso @ 1 g hz lno 10 00 b2 C revision c C april 2016 2 / 4 www.rakon.com r a k o n r e s e r v e s t h e r i g h t t o m o d i f y h e r e i n s p e c i f i c a t i o n s a n d i n f o r m a t i o n w h e n n e c e s s a r y t o p r o v i d e o p t i m u m p e r f o r m a n c e a n d c o s t specifications 1.0 environmental conditions line parameter test condition typ. value gua rante e d unit 1.1 operating temperature range standard 0 to +5 0 c 1 . 2 storage temperature range - 40 to + 85 c 1 . 3 shock as per mil - prf - 28800f, class 3, test equipment 1.4 random v ibration as per mil - prf - 28800f, class 3, test equipment 1.5 g - sensitivity @10hz offset, on each axis 1 < 2 ppb/g 2.0 electrical interface line parameter test condition typ. value gua rante e d unit 2 .1 supply voltage pin 2 +10 0.2 v 2.2 load impedance pin 1, 50 ? all phases - < 1.3:1 vswr 2.3 control input pin 4 +2 to +7 v 2.4 input impedance pin 4 - > 10 k ? 3.0 performances line parameter test condition typ. value gua rante e d unit 3 .1 nominal frequency definition 10 00 mhz 3 .2 frequency calibration initial calibration @ 25c ? 0. 2 < ? 0.5 ppm 3 .3 frequency stability on standard temperature range ? 1 < ? 2 p pm 3 . 4 long term stability after 30 days of continuous operation 1 st year 10 years - - < ? 1 < ? 6 ppm ppm 3.5 power consumption warm - up 6.0 < 6. 5 w 3.6 power consumption @ 25 c (calm air) 2.0 < 2 .8 w 3 . 7 warm - up time @ 25 c : ? 1 ppm with reference to frequency reached after 1 hour of continuous operation - < 2 minutes 3.8 frequency tuning monotone ? 5 > ? 4 ppm 3 . 9 slope p ositive slope - 1 .5 to 3 ppm /v 3 .1 0 output power sine wave into 50 ? load - +10 ? 1 dbm 3.11 output impedance at 10 00 1mhz - < 2.0:1 vswr
low noise oscillator series lno 10 00 b 2 ocso @ 1 g hz lno 10 00 b2 C revision c C april 2016 3 / 4 www.rakon.com r a k o n r e s e r v e s t h e r i g h t t o m o d i f y h e r e i n s p e c i f i c a t i o n s a n d i n f o r m a t i o n w h e n n e c e s s a r y t o p r o v i d e o p t i m u m p e r f o r m a n c e a n d c o s t 4.0 single side band phase noise (pn) and time jitter line parameter test condition typ. value gua rante e d unit 4.1 pn power density @ 1 khz offset static conditions, at 25c (guaranteed values on full temperature range) - 13 5 < - 13 0 dbc/hz 4.2 pn power density @ 10 khz offset - 159 < - 15 6 dbc/hz 4.3 pn power density > 1 mhz offset - 172 < - 170 dbc/hz 4.4 harmonic distortion all sub - harmonics , 2 nd and 3 rd harmonics - 40 < - 30 dbc 4.5 spurious non - harmonics - < - 80 dbc 4.6 full offset range from 10 hz to 100 mhz 15 0 < 20 0 fs 4.7 broadband from 10 khz to 4 0 mhz - < 6 fs
low noise oscillator series lno 10 00 b 2 ocso @ 1 g hz lno 10 00 b2 C revision c C april 2016 4 / 4 www.rakon.com r a k o n r e s e r v e s t h e r i g h t t o m o d i f y h e r e i n s p e c i f i c a t i o n s a n d i n f o r m a t i o n w h e n n e c e s s a r y t o p r o v i d e o p t i m u m p e r f o r m a n c e a n d c o s t 5 .0 mechanical features outline in mm , nominal values (general tolerances : ? 0.2 mm). 6 .0 pin description line name type description 6 .1 f out sma jack rf o utput signal 6.2 v cc feed - thru input power supply (+) 6.3 gnd lug mechanical and electrical ground ( - ) 6.4 vctl feed - thru input control voltage
|
